Applied and Technical Studies

Welding Foundation, Level B, and Level A certificates

Welding Foundation

This 34-week program offers basic training for entry-level employment in a broad variety of welding, steel fabrication, and related jobs. The curriculum covered is organized on the model adopted by the provincial welding trades advisory committee. The particular modules taught in this course have been adopted as a result of priorities and recommendations of UFV's local advisory committee. Upon completion of the foundation program students receive credit for Welding Apprenticeship Level 1 and Level 2.

Welding Level B and Level A

These programs offer advanced training beyond Level C/Foundation. Level B has intakes throughout the year. Please contact the Trades & Technology Centre at 604-847-5448 or trades@ufv.ca for details.

Concurrent studies option

UFV allows secondary school students to complete this program through a concurrent studies model during their Grade 12 year. For more information, students should contact their district/school career counsellor. Students may also contact the UFV Trades & Technology Centre at 604-847-5448 or email trades@ufv.ca.

Employment opportunities

Upon successful completion of the Foundation level program, students will be prepared for a variety of employment opportunities in metal working industries, such as production welder, maintenance welder, welder-fitter, welder-fabricator, etc.

Entrance requirements

Welding Foundation

Secondary school graduation is strongly recommended for career success. In addition to UFV’s general university admission requirements, which include the English language proficiency requirement, students must meet the following entrance requirements for admission.

1. One of the following:
   • B.C. secondary school graduation or equivalent.
   • Mature student status (19 years or older).
2. One of the following:
   • Completion of any Mathematics 10 (or higher grade) or equivalent (including Foundations of Mathematics, Pre-calculus, Apprenticeship and Workplace Mathematics, MATH 072, or MATH 076) with a grade of C or better.
   • Successful completion of a UFV trades math entrance exam.

   Note: Students who have not been in any schooling for more than three years are strongly advised to take the recommended mathematics assessment test to determine level of preparedness. The assessment test may identify areas that require strengthening to optimize the opportunities for program success. In most cases, upgrading can be taken simultaneously with the program.

3. One of the following:
   • Completion of English Studies 12 or English First Peoples 12 (see Note) with a grade of C or better.

     Note: Students may also present Communications 12, English 12, English Literature 12, English 12 First Peoples, AP English, IB English A (standard level or higher level), or out-of-province equivalent.

   • UFV Accuplacer Reading comprehension score of 80 or better, together with Accuplacer WritePlacer score of 5 or better on the 8-point scale.
   • UFV CPT (Composition Placement Test) — score of 41 or higher.
   • TOEFL iBT score of 80 with no section below 19.
   • Completion of any other test score or course grade listed in the Entry-level post-secondary English language proficiency standards.

Note: Contact the department for information on entrance into Welding Level 3 and the Specialty Metals Endorsement apprenticeship programs.

When to apply

Applications are accepted on a continuous basis throughout the year. Qualified applicants are considered for the next intake in which there is space. See Continuous application process for more information.

How to apply

1. Apply online at ufv.ca/admissions/apply. Applicants currently in Grade 12 may apply during their Grade 12 year. A statement from the school counsellor or principal, indicating that they are likely to meet graduation requirements by June, must be presented. A transcript showing evidence of meeting the entrance requirements will be required in order to be offered a seat.
2. Applicants who do not meet the math entrance requirement can book a testing date for the UFV trades math entrance exam online at ufv.ca/trades/entrance-exam.
3. Applicants who do not meet the English language entrance requirement will be given the opportunity to meet the English requirement through Adult Basic Education, English Language Studies, and/or the University Foundation certificate.
4. Read the program description and information carefully. For more information, please contact the Trades & Technology Centre at 604-847-5448 or trades@ufv.ca.
5. Prior to classes starting, applicants will be notified by telephone or email of the registration procedures. Applicants who cannot be reached after three attempts will be removed from the wait list.

Basis for admission decision

Applicants who meet the entrance requirements will be admitted in order of their application date. This date is set when an application, all required documentation, and the application fee have been submitted.

Fees and additional costs

See the Fees and Other Costs section. Welding students should also budget approximately $325 for basic hand tools, $300 for required textbooks, and $500 for appropriate working apparel.

Note: A deposit (currently $200) must be paid at the time of registration, which typically takes place one or two months before the start of the program.

Medical requirement

A medical statement from a qualified physician may be required at any time before or during the program. Students will be notified by a UFV official if/when the statement is required.

Dates and attendance requirements

For program start and end dates for the welding program offered at the Canada Education Park in Chilliwack, please contact the Trades & Technology Centre at 604-847-5448 or trades@ufv.ca.

The welding programs require continuous attendance throughout the entire program to successfully complete all requirements.

Students must meet the attendance requirements as outlined in their individual program guides. See UFV's Attendance policy (62).

Location

The Welding program is located in the Trades & Technology Centre at the Canada Education Park in Chilliwack. The Trades Reception Centre office hours are 8am–4pm, Monday to Friday. Classes and shops may be scheduled 8am–11pm, Monday to Friday, which includes day or evening shifts.

Program outline

Sample topics

Foundation program

• Occupation Skills
• Oxy-Fuel Cutting and Gouging Processes
• Fusion and Braze Welding
• Shielded Metal Arc Welding
• Electric Arc Cutting, Gouging and Related Processes
• Semi-Automatic Welding
• Basic Metallurgy
• Welding Drawings
• Layout and Fabricate Components
• Submerged Arc Welding

Level B

• Shielded Metal Arc Welding #2 (SMAW #2)
• Gas Metal Arc Welding #2 (GMAW #2)
• Flux Cored Arc Welding #2 (FCAW #2)
• Gas Tungsten Arc Welding #1 (GTAW #1)
• Welding Quality Control and Inspection Standards
• Welding Codes, Standards and Specifications
• Blue Print Reading #2
• Welding Metallurgy #2

Level A

• Shielded Metal Arc Welding (SMAW #3)
• Gas Tungsten Arc Welding (GTAW #2)
• Welding Metallurgy #3
• Blue Print Reading #3

In addition to the above topics, students will be required to practise layout and fabrication by completing a series of fabrication exercises and projects.

Program requirements

Students must complete all requirements with a grade of 70% or better to receive a Credit (CR) grade in order to graduate.

Students who do not receive a Credit (CR) grade in all required areas by the program end date, may apply to their instructor for re-entry into the program. Students who reapply may register as upgrading students and must complete all program requirements no later than the program end date of the following year. See Upgrading section for more details.

Attendance and conduct

Unacceptable academic performance may, at the discretion of the instructor, include poor attendance, slow progress in theory and practical tasks, and/or lack of satisfactory participation in class activities. See UFV's Attendance policy (62) and the program attendance policy as stated in the learning guide.

Applied and Technical Studies students are expected to conduct themselves in a mature and responsible manner, and will be held responsible for their actions, whether acting alone or in group. See UFV's Student Academic Misconduct policy (70) and Safe Student Learning Community policy (204).

Withdrawal

Student-initiated withdrawal (discontinuing)

If a student wishes not to continue, they will need to initiate a withdrawal at the Office of the Registrar.

Required to withdraw

Failed grades may result in withdrawal from the program. Students may be required to withdraw from a course or program for failing to comply with attendance, conduct, or program policies, or UFV policies including: Attendance policy (62), Student Academic Misconduct policy (70), Safe Student Learning Community policy (204).

Upgrading

The upgrading program allows those currently or recently employed in the industry to complete their certificate requirements or to become proficient in specific processes or techniques.

An upgrading student will be enrolled for no more than 13 weeks. Upgrading students will not displace anyone registered in the next intake.

Upgrading students are expected to meet program prerequisites through previous enrolment or proof of industry experience approved by the program instructor.

Readmission

Students who begin a Trades program, but withdraw before completing the program, may contact the department to request re-entry to the program provided their absence is less than two years. Re-entry is conditional based on space availability and instructor permission, and if the curriculum has not changed.

Students who are absent for more than one year will be required to apply for readmission. An application for admission form and application fee will be required.

Graduation requirements

Students must apply for graduation by completing the Graduation Request form available at ufv.ca/registrar/forms.